Journal Search Engine
Search Advanced Search Adode Reader(link)
Download PDF Export Citaion korean bibliography PMC previewer
ISSN : 1225-0112(Print)
ISSN : 2288-4505(Online)
Applied Chemistry for Engineering Vol.21 No.3 pp.323-327
DOI :

Research Papers : Synthesis of Ti-SBA-15 Doped with Lanthanide Ion and Photocatalytic Decomposition of Methylene Blue

Won Young Jung

Abstract

Ti-SBA-15 catalysts doped with lanthanide ion were synthesized using conventional hydrothermal method and they were characterized by XRD, FT-IR, DRS, NH3-TPD and PL. We also examined the activity of these materials on the photocatalytic decomposition of methylene blue. La/Ti-SBA-15 samples with varying lanthanide ions doping maintained the mesoporous structure and the catalysts calcined at 500 ℃ for 6 h showed the highest crystallinity. With increasing the doping amount of lanthanide ion, the pore size and pore volume of La/Ti-SBA-15 materials decreased but the surface area increased. 1%La/Ti-SBA-15 catalysts showed the highest photocatalytic activity on the decomposition of methylene blue but the catalysts doped with more than 5% lanthanide ions showed lower activity compared to pure Ti-SBA-15 catalyst.

연구논문 : La 이온이 도핑된 Ti-SBA-15의 합성 및 메틸렌블루의 광촉매 분해 반응

정원영,홍성수

초록

La 이온이 도핑된 Ti-SBA-15 촉매를 수열합성법으로 제조하였고, 이들의 특성을 XRD, FT-IR, DRS, NH3-TPD 및 PL 등을 이용하여 조사하였다. 또한, 이 촉매를 사용하여 메틸렌블루에 대한 광분해 반응성을 조사하였다. La 이온이 도핑되더라도 Ti-SBA-15 촉매는 메조동공체 구조를 유지하고 있으며, 500 ℃에서 6 h 동안 소성 한 것이 가장 결정성이좋았다. La 이온의 치환량이 증가함에 따라 기공의 크기와 기공의 부피가 줄어들었으며 표면적은 오히려 증가하였다. 메틸렌블루의 광분해 반응에서 1%의 La 이온을 첨가 시킨 것이 가장 높은 광촉매 활성을 보여주었으며, 도핑량이5% 이상이 되면 순수한 Ti-SBA-15 촉매보다 오히려 활성이 떨어진 것을 볼 수 있다.

Figure

Table