Journal Search Engine
Search Advanced Search Adode Reader(link)
Download PDF Export Citaion korean bibliography PMC previewer
ISSN : 1225-0112(Print)
ISSN : 2288-4505(Online)
Applied Chemistry for Engineering Vol.20 No.4 pp.407-410
DOI :

Research Papers : Removal if Ethylene Over KMnO4/Silica-alumina: Effect of Synthesis Methods and Reaction Temperatures

Min Whee Cho

Abstract

18∼19 wt% KMnO4/SiO2-Al2O3 with Si/Al = 1/5 and 1/10, and 20 wt% KMnO4/Al2O3 were prepared by solvent evaporation method. Catalytic activity of ethylene abatement over those samples were evaluated and compared under the conditions of GHSV 1125 h-1, ethylene gas (ethylene 0.2%, air 99.8%, relative humidity 50%) at 30, 40, 60 and 120 ℃ using a fixed-bed reactor. KMnO4/SiO2-Al2O3 was showed better performance than KMnO4/Al2O3 by 170∼210% at 30, 40 ℃, and by 60% at 60, 150 ℃, respectively.

연구논문 : KMnO4/실리카-알루미나 상에서 에틸렌 제거: 합성 방법과 반응온도의 영향

조민휘,윤성훈

초록

실리카-알루미나의 Si/Al 조성이 1:5, 1:10 및 0:1 (100% 알루미나)에 KMnO4를 18∼20중량% 담지시킨 KMnO4/실리카-알루미나와 KMnO4/알루미나를 용매증발법으로 제조하였다. 이 촉매를 사용하여 GHSV = 1125 h-1, 에틸렌이 포함된 혼합가스(에틸렌 0.2%, 공기 99.8%, 상대습도 50%)를 30 ℃, 40 ℃, 60 ℃, 150 ℃에서 고정층 반응기를 사용하여 각 촉매들에 대해 에틸렌 제거율을 비교하였다. 그 결과 실리카-알루미나 담체를 사용한 촉매가 알루미나 담체를 사용한 촉매보다 30∼150 ℃ 온도 범위에서 우수한 성능을 보여주었는데, 30∼40 ℃에서는 170∼210%, 60 ℃ 및 150 ℃에서는 약 60% 우수한 성능을 보여주었다.

Figure

Table